How can we use the uncoiler feeder?

The uncoiler feeder is an automatic feeder that integrates multiple functions of uncoiler, leveling, and feeder. Compared with the traditional split feeder or the automatic feeder used by the two-in-one material leveler and servo feeder, Punch three-in-one servo feeder is a little more difficult to use.

• What should be paid attention to before using the uncoiler feeder?

• What are the operating steps in the process of using the uncoiler feeder?

• What are the characteristics of the uncoiler feeder?

What should be paid attention to before using the uncoiler feeder?

1. When using the uncoiler feeder, first use a crane or forklift to place the coil material vertically on the feeding trolley, and then control the feeding trolley to walk inward and rise by operating the hand-held remote control box.

2. After the upper trolley has finished walking, the operation is to put the coil material on the uncoiling expansion and shrinking reel, so that the center of the coil material coincides with the center of the material rack as much as possible, and the coil material is just close to the limit arm on the inner side to control the material rack The expansion and contraction reel expands, the inner ring of the material roll is tightened, and the feeding trolley is operated to walk outward and exit.

What are the operating steps in the process of using the uncoiler feeder?

1. Raise the supporting arm, press down the pressing arm, raise the feeding and folding arm of the leveling part, and open the leveling roller. By operating the uncoiler material rack to rotate forward, the material rack is reversed and the supporting arm is lifted to lift the material Send it to the folding arm, then lower the folding arm, control the forward rotation of the material rack, so that the coil material automatically enters the leveling roller.

2. Put down the material support arm of the feeder of the uncoiler, jog the forward rotation button of the material rack to form a material ring, switch the operation mode of the material rack from the manual operation mode to the automatic operation mode, and operate the forward jog button of the leveling feeder , and repeatedly adjust the amount of downward pressure for correction, observe the material coming out of the discharge port, and know that the correction effect is qualified.

3. According to the stamping process characteristics of the punching machine, after setting the feeding length, frequency, speed, feeding line height and other parameters on the three-in-one servo feeder, it can cooperate with the punching machine for continuous automatic production.

What are the characteristics of the uncoiler feeder?

The uncoiler feeder is a device specially designed for uncoiling metal coils. It can be used for uncoiling and rewinding of metal coils. It is widely used in household appliances, automobiles, hardware, electronics and other fields, which greatly improves the production of enterprises. Increase production capacity and reduce labor costs.

Yingxin World Machinery was established in Shanghai in 2009 authorized by World Group to act as an exporting center for all World brand machines including the power press machines, hydraulic shearing machines, hydraulic press brakes and automatic accessories.