NC Roll Feeder Machine for Automatic Metal Strip Feeding

Technical Parameters

Features of metal strip feeder machine

a) High precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system. So that the precision can maintain within +/-0.03mm.

b) Phase-style feeding function: It can input 10 groups of different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products

c) High efficiency release device: It can set up release angle quickly, only match cam signal.

d) Feeding length setting: Input feed length on the controller panel directly.

e) Feeding unit: The roll adopts middle-hollow style. Being light and with low inertia for electroplate. The surface hardness HRC is 60 and hard chrome plated.

Specifications of roll feeder machine

NCF feeder for thickness less than 2.2mm

Model No	NCF-100	NCF-200	NCF-300	NCF-400	NCF-500	NCF-600	NCF-700	NCF-800
Material thickness	0.2-2.2mm
Material width	100mm	200mm	300mm	400mm	500mm	600mm	700mm	800mm
Max. feeding length	9999mm
Feeding speed	20m/min
PLC	MITSUBISHI
Servo motor	YASKAWA
Release type	Mechanical	Mechanical/pneumatic			pneumatic

NC servo feeder for thickness less than 3.2mm

Model No	NCF-100	NCF-200	NCF-300	NCF-400	NCF-500	NCF-600	NCF-700	NCF-800	NCF-1000
Material thickness	0.2-3.2mm
Material width	100mm	200mm	300mm	400mm	500mm	600mm	700mm	800mm	1000mm
Max. feeding length	9999mm
Feeding speed	20m/min
PLC	MITSUBISHI
Servo motor	YASKAWA
Release type	Mechanical	Mechanical/pneumatic			pneumatic

NC coil feeder for thickness less than 4.5mm

Model No	NCF-100	NCF-200	NCF-300	NCF-400	NCF-500	NCF-600	NCF-700	NCF-800
Material thickness	0.2-4.5mm
Material width	100mm	200mm	300mm	400mm	500mm	600mm	700mm	800mm
Max. feeding length	9999mm
Feeding speed	20m/min
PLC	MITSUBISHI
Servo motor	YASKAWA
Release type	Mechanical	Mechanical/pneumatic			pneumatic