TL Series Coil Straighteners for 3.5mm Metal Sheet Straightening
Technical Parameters
Main features:
-applicable for straightening coil thickness less than 3.5mm
-can work with uncoiler and roll feeder
-adopts 4pcs feeding rollers and 7pcs straightening rollers
-rollers surfaces are chrome treatment with hardness HRC60
-straighening roller gap is adjusted by four independent wheels, indicated by four rulers
Specifications:
| Model No | TL-200 | TL-300 | TL-400 | TL-500 | TL-600 |
| Material thickness | 0.4-3.5mm | 0.4-3.5mm | 0.4-3.5mm | 0.4-3.5mm | 0.4-3.5mm |
| Material width | 200mm | 300mm | 400mm | 500mm | 600mm |
| Straightener roller | Upper 3/lower 4 | Upper 3/lower 4 | Upper 3/lower 4 | Upper 3/lower 4 | Upper 3/lower 4 |
| Feeding roller | 4 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs |