Technical requirements for shearing machines
Publish Time: 2021-12-20 Origin: Site
The shearing machine is a kind of machine tool, which adopts hydraulic drive, reliable safety performance and convenient operation. This article will introduce the relevant knowledge of the shearing machine, I hope it will be helpful to everyone.
Technical requirements for shearing machines.
The company has shearing machine products.
Technical requirements for shearing machines.
1. Before work, carefully check whether the shearing machine is normal, whether the electrical equipment is intact, and whether the lubrication system is unblocked; remove debris and scraps on the countertop and surrounding areas.
2. Do not operate the shearing machine alone. 2-3 people should coordinate the feeding, control the dimensional accuracy and take the material, and make sure that one person is responsible for the unified command.
3. It is necessary to specify the thickness of the shears and adjust the gap between the shears of the shears. It is not allowed to cut two different specifications and different materials at the same time; it is not allowed to cut by overlapping materials. The cut sheet requires a flat surface, and it is not allowed to cut narrow sheets that cannot be compressed.
4. The belt, flywheel, gear, shaft and other moving parts of the shearing machine must be equipped with a protective cover.
5. The flywheel, gear, shaft, tape and other moving parts of the shearing machine should be equipped with a protective cover.
6. Place a fence to prevent hands from entering the area where the scissors fall. It is strictly forbidden to pick up waste materials during work to avoid being injured by falling workpieces.
7. The shearing machine cannot cut the quenched material, and it is never allowed to cut beyond the working capacity of the shearing machine.
The company has shearing machine products.
Yingxin World Machinery was established in Shanghai in 2009. It is the export center of all world-brand machines authorized by the World Group, including power presses, hydraulic shears, hydraulic bending machines, automation accessories, and shearing machines. World Precision Machinery (China) is the largest branch of the World Group, focusing on the production and technical research of power presses. The original factory was built in 1953 to produce small eccentric punches for the new Chinese industry. World Group acquired this factory in 1998 and expanded its production capacity and product range. With more than 65 years of professional experience and strong production capacity, we believe that world-brand metal forming machines will provide better services to the international stamping industry. The Shanghai Export Center is working hard to accomplish this mission.
We mainly supply metal shearing machines: shearing machines for cutting metal plates into different sizes, laser shearing machines for cutting metal plates or tubes into different shapes and sizes, and band saw shearing machines for cutting metal bars into different sizes . Shears and band saws are both knife-type cutting machines: the knife or blade is driven by mechanical or hydraulic power to perform straight cuts. The laser cutting machine adopts laser cutting and is controlled by a numerical control system, which can perform straight, circular and curved cutting. Here you can find a cutting machine suitable for your metal processing. Numerical control and CNC control systems can also be used for sheet metal cutting machines.
If you are satisfied with our company's shearing machine, you can directly order or consult related questions about the shearing machine. We will provide you with the best shearing machine products and services. Looking forward to your visit, I wish you success in your work.