maintenance and checking list of 3 in 1 servo roller feeder

Maintenance term in irregularly scheduled

Equipment cover

Touch screen

Clean the equipment cover

Clean the touch screen

Daily check and Maintenance term

Decoiler’s loop control function;   

Emergency stop function

Check if loop control sensor work very well;

Check if the emergency buttons work very well.

Weekly check and maintenance term

Drive gears of the straightener feeder part; 

Material width adjust & guide device at straightener feeder’s entrance; 

Decoiler’s Mandrel expansion part.

Check if there is enough grease in movable parts; 

Fill oil to the gears; 

Fill grease to decoiler’s mandrel expansion parts.

Monthly check term

Decoiler’s chains; 

Synchronous belt of the straightener feeder; 

Press wheel driving chain of the decoiler; 

Bearing’s position of the decoiler’s main axle; 

Air filter.

Add grease to chains; 

Check if synchronous belts are in good tension condition; 

Add grease on bearings of the decoiler’s main axle; 

Check if the screws are loose or not. 

Add lubrication oil in air filter and  clear water and impurity in air filter