Safe operation regulations of bending machine

The bending machine can bend thin plates. This article will introduce the relevant knowledge of the shearing machine, and I hope it will be helpful to everyone.

Safety operating procedures for press brakes

The company has bending machine products.

Safety operating procedures for press brakes.

1. It is strictly forbidden to fold the sheet metal at one end of the bending machine alone;

2. If the workpiece or mold is found to be incorrect when the bending machine is running, it should be stopped for calibration. It is strictly forbidden to calibrate by hand during operation to prevent hand injury;

3. It is forbidden to fold over-thick iron plates or quenched steel plates, high-grade alloy steels, square steels, and sheets that exceed the performance of the sheet metal bending machine to avoid damage to the machine tool;

4. Frequently check the overlap of the upper and lower molds; whether the instructions of the pressure gauge meet the regulations;

5. Immediately stop the bending machine when an abnormality occurs, check the cause and eliminate it in time;

6. Before bending the machine, place wooden blocks on the lower molds under the cylinders on both sides to lower the upper slide plate onto the wooden blocks;

7. Exit the control system program first, and then cut off the power supply.

The company has bending machine products.

Yingxin World Machinery was established in Shanghai in 2009. It is the export center of all world-brand machines authorized by the World Group, including power presses, hydraulic shears, hydraulic bending machines, automation accessories, and shearing machines. World Precision Machinery (China) is the largest branch of the World Group, focusing on the production and technical research of power presses. The original factory was built in 1953 to produce small eccentric punches for the new Chinese industry. World Group acquired this factory in 1998 and expanded its production capacity and product range. With more than 65 years of professional experience and strong production capacity, we believe that world-brand metal forming machines will provide better services to the international stamping industry. The Shanghai Export Center is working hard to accomplish this mission.

The bending machine is used for sheet metal bending or arc bending (rolling). The hydraulic bending machine can bend metal plates into different angles with tools. The coiling machine is mainly used for the rolling of sheet metal. The profile bending machine can bend different types of steel bars and pipes. As a Chinese bending machine factory, we can provide a complete selection of metal processing equipment, such as a 3-roll bending machine using profile bending technology, and an economical hydraulic bending machine suitable for the metal processing industry.

We can recommend suitable sheet metal bending machines according to your requirements. Customers can provide final product drawings, material type, sheet thickness, width or some similar information. Our engineers can calculate and recommend the best production process and the most suitable bending machine. Different bending tools (lower die and upper punch) can also be used. Optional professional bending machine control system, such as Estun E21 NC system, Delem DA52 CNS system, etc.

If you are satisfied with our company's bending machine, you can directly order or consult related questions about the bending machine. We will provide you with the best bending machine products and services. Looking forward to your visit, I wish you success in your work.