Technical conditions of hydraulic press

hydraulic presses refer to molding machines used for pressure molding of industrial products. This article will introduce the relevant knowledge of the hydraulic press, I hope it will be helpful to everyone.

• Technical conditions of hydraulic presses.

• The company has hydraulic press products.

Technical conditions of hydraulic presses.

The hydraulic press is suitable for the bending, forming, flanging and other processes of central load parts. After being equipped with a punching buffer device, it can also be used for punching and blanking processing. It is the first choice for the shipbuilding industry, pressure vessel industry, chemical industry and other industries.

1. The technical requirements of the drawings and technical documents of the hydraulic press shall comply with the relevant current standards and shall be approved in accordance with the prescribed procedures before it can be used for production.

2. Reasonable design, beautiful appearance, safe and reliable use, sensitive operation, hand control force not more than 49N (5kgf), pedal force not more than 78?4N (8kgf).

3. Wear-resistant measures should be taken for important guide rails, columns, and live (plunger) plugs. The sliding block guide rail work and the fuselage track-seeking working surface maintain poor hardness.

4. Parts, components or equipment weighing more than 15kg must be easy to lift and install, and there should be lifting holes or lifting hooks (loops).

5. The packaged hydraulic press and its parts should comply with transportation and loading standards and relevant regulations.

6. The sub-assembled parts shall have relevant installation identification marks. Among them, plate or tube valves must be installed with correct orientation measures, and the pipelines and hydraulic components should have dust-proof measures.

The company has hydraulic press products.

Yingxin World Machinery was established in Shanghai in 2009. It is the export center of all world-brand machines authorized by the World Group, including power presses, hydraulic shears, hydraulic bending machines and automation accessories. World Precision Machinery (China) is the largest branch of the World Group, focusing on the production and technical research of power presses. The original factory was built in 1953 to produce small eccentric punches for the new Chinese industry. World Group acquired this factory in 1998 and expanded its production capacity and product range. With more than 65 years of professional experience and strong production capacity, we believe that world-brand metal forming machines will provide better services to the international stamping industry. The Shanghai Export Center is working hard to accomplish this mission.

The hydraulic press is powered by hydraulic cylinders. We supply C frame single-column hydraulic press, four-column hydraulic press and box column hydraulic press. The hydraulic cushion under the pillow is optional. The hydraulic press is most suitable for the stamping and stretching of sheet metal parts. It is suitable for the production of deep-drawn parts such as kitchen sinks, rice cookers, pans, cups, filter chambers, tin cans, etc. The hydraulic press is also suitable for hot forging.

If you are satisfied with our company's hydraulic press, you can directly order or consult hydraulic press related issues. We will provide you with the best hydraulic press products and services. Looking forward to your visit, I wish you success in your work.