Maintenance measures for the hydraulic press

hydraulic pressesrefer to molding machines used for pressure molding of industrial products. This article will introduce the relevant knowledge of the hydraulic press, I hope it will be helpful to everyone.

Maintenance measures for the hydraulic press.

Common failures of hydraulic presses.

The company has hydraulic press products.

Maintenance measures for the hydraulic press.

hydraulic press machine maintenance before shift

(1) Check whether the oil sump, oil level, and oil standard meet the specified standards. If they do not meet the requirements, replenish the oil in time.

(2) Check whether the button is flexible and whether it is jammed.

(3) Check whether the grounding wire of the motor is loose, dropped or damaged. If it is loose, it should be tightened. If it is off or damaged, it should be notified to maintenance personnel.

(4) Check whether the safety protection device is complete and reliable.

(5) Check whether the handles are flexible.

(6) Tighten the loose nuts of each part.

hydraulic press machine maintenance during shift

(1) Start the hydraulic pump and check whether the hydraulic pump works well, and whether the sealing parts and pipelines are blocked or leaked.

(2) Check whether the limit switch works well and whether the positioning of the bumper is normal.

(3) Always pay attention to whether the temperature rise and sound of all moving parts are normal.

Common failures of hydraulic presses.

(1) Uneven loading

There is residual gas in the system, you can operate through the relevant content in the third item, and loosen the oil pipe joint at the lower part of the back of the oil cylinder.

(2) The oil pump motor does not work

Replace the fuse.

(3) The display does not show

①Replace the fuse

②Remove the rear cover to check whether the power cord is firmly connected

(4) The display is abnormal

After power off, open the back cover and check whether the sensor input connector is reliable. If it is intact, check whether the sensor is normal.

The company has hydraulic press products.

Yingxin World Machinery was established in Shanghai in 2009. It is the export center of all world-brand machines authorized by the World Group, including power hydraulic presses, hydraulic shears, hydraulic bending machines and automation accessories. World Precision Machinery (China) is the largest branch of the World Group, focusing on the production and technical research of power hydraulic presses. The original factory was built in 1953 to produce small eccentric punches for the new Chinese industry. World Group acquired this factory in 1998 and expanded its production capacity and product range. With more than 65 years of professional experience and strong production capacity, we believe that world-brand metal forming machines will provide better services to the international stamping industry. The Shanghai Export Center is working hard to accomplish this mission.

Among the many products, hydraulic presses include: crank hydraulic presses, gear hydraulic presses, connecting rod hydraulic presses, servo hydraulic presses, forging hydraulic presses, hydraulic presses, etc.

If you are satisfied with our company's hydraulic press, you can directly order or consult hydraulic press related issues. We will provide you with the best hydraulic press products and services. Looking forward to your visit, I wish you success in your work.