Maintenance measures for the press machine

Press machines refer to molding machines used for pressure molding of industrial products. This article will introduce the relevant knowledge of the press machine, I hope it will be helpful to everyone.

Maintenance measures for the press machine.

Common failures of press machines.

The company has press machine products.

Maintenance measures for the press machine.

press machine machine maintenance before shift

(1) Check whether the oil sump, oil level, and oil standard meet the specified standards. If they do not meet the requirements, replenish the oil in time.

(2) Check whether the button is flexible and whether it is jammed.

(3) Check whether the grounding wire of the motor is loose, dropped or damaged. If it is loose, it should be tightened. If it is off or damaged, it should be notified to maintenance personnel.

(4) Check whether the safety protection device is complete and reliable.

(5) Check whether the handles are flexible.

(6) Tighten the loose nuts of each part.

press machine machine maintenance during shift

(1) Start the hydraulic pump and check whether the hydraulic pump works well, and whether the sealing parts and pipelines are blocked or leaked.

(2) Check whether the limit switch works well and whether the positioning of the bumper is normal.

(3) Always pay attention to whether the temperature rise and sound of all moving parts are normal.

Common failures of press machines.

(1) Uneven loading

There is residual gas in the system, you can operate through the relevant content in the third item, and loosen the oil pipe joint at the lower part of the back of the oil cylinder.

(2) The oil pump motor does not work

Replace the fuse.

(3) The display does not show

①Replace the fuse

②Remove the rear cover to check whether the power cord is firmly connected

(4) The display is abnormal

After power off, open the back cover and check whether the sensor input connector is reliable. If it is intact, check whether the sensor is normal.

The company has press machine products.

Yingxin World Machinery was established in Shanghai in 2009. It is the export center of all world-brand machines authorized by the World Group, including power press machines, hydraulic shears, hydraulic bending machines and automation accessories. World Precision Machinery (China) is the largest branch of the World Group, focusing on the production and technical research of power press machines. The original factory was built in 1953 to produce small eccentric punches for the new Chinese industry. World Group acquired this factory in 1998 and expanded its production capacity and product range. With more than 65 years of professional experience and strong production capacity, we believe that world-brand metal forming machines will provide better services to the international stamping industry. The Shanghai Export Center is working hard to accomplish this mission.

Among the many products, press machines include: crank press machines, gear press machines, connecting rod press machines, servo press machines, forging press machines, hydraulic press machines, etc.

If you are satisfied with our company's press machine and Automatic Feeding Machine, you can directly order or consult the coil feeder-related issues. We will provide you with the best coil feeder products and services. Looking forward to your visit, I wish you success in your work.