Products
Availability: | |
---|---|
Quantity: | |
JH21Z
WORLD
JH21Z fast speed c type crank press stroke length is shorter than standard JH21 crank press. The tonnage point is a little smaller too. The speed is faster, suitable for thin sheet metal parts blanking and cutting. Automatic grease lubrication system and the high quality shaft bushes ensure the lubrication and temperature controlling, although the speed is that fast. Reliable performance and high working efficiency.
This automatic fast speed press is slower than standard high speed press. But the cost is also much lower. Customer no need to pay more if the stamping process does not need high speed such as 200 spm. JH21Z crank press is designed to match the demand of medium speed press. Such as the automatic blanling line for EI parts and chain plates.
PLC control with HMI
Automatic central grease lubrication system
Hydraulic overload protection system
Cam controller
Counter and pre-set counter
Mis-feeding joints
Anti-repeat stroke sensor
Anti-vibration mounting pads
Working light
Die height indicator
JH21Z fast speed c type crank press stroke length is shorter than standard JH21 crank press. The tonnage point is a little smaller too. The speed is faster, suitable for thin sheet metal parts blanking and cutting. Automatic grease lubrication system and the high quality shaft bushes ensure the lubrication and temperature controlling, although the speed is that fast. Reliable performance and high working efficiency.
This automatic fast speed press is slower than standard high speed press. But the cost is also much lower. Customer no need to pay more if the stamping process does not need high speed such as 200 spm. JH21Z crank press is designed to match the demand of medium speed press. Such as the automatic blanling line for EI parts and chain plates.
PLC control with HMI
Automatic central grease lubrication system
Hydraulic overload protection system
Cam controller
Counter and pre-set counter
Mis-feeding joints
Anti-repeat stroke sensor
Anti-vibration mounting pads
Working light
Die height indicator
ITEM | CODE | UNIT | JH21Z-25 | JH21Z-45 | JH21Z-60 | JH21Z-80 | JH21Z-125 | |
Nominal Capacity | Pe | KN | 250 | 450 | 600 | 800 | 1250 | |
Tonnage points | mm | 2 | 2.5 | 2.5 | 3.2 | 3.6 | ||
Slide Stroke Length | S | mm | 40 | 50 | 55 | 60 | 70 | |
Slide Strokes | Fixed | spm | 140 | 130 | 120 | 120 | 90 | |
Variable | spm | 95-165 | 85-155 | 80-145 | 80-145 | 60-110 | ||
Max. Shut Height | H2 | mm | 200 | 240 | 260 | 290 | 320 | |
Shut Height Adjustment | t | mm | 30 | 30 | 40 | 40 | 40 | |
Throat Depth | C1 | mm | 135 | 180 | 210 | 240 | 270 | |
Distance Between Columns | d1 | mm | 450 | 515 | 560 | 610 | 670 | |
Slide Bottom Size | F-B | b | mm | 250 | 340 | 480 | 460 | 520 |
L-R | a | mm | 360 | 400 | 400 | 540 | 620 | |
Shank Hole Size | Diameter | d | mm | 50 | 50 | 50 | 50 | 70 |
Depth | I | mm | 50 | 60 | 70 | 70 | 80 | |
Table Size | F-B | D | mm | 250 | 340 | 400 | 460 | 520 |
L-R | C | mm | 720 | 825 | 930 | 950 | 1100 | |
Thickness | H3 | mm | 60 | 80 | 100 | 110 | 125 | |
Table Hole Diameter | ¢ | mm | 150 | 150 | 150 | 180 | 200 | |
Overall Dimensions | F-B | A | mm | 1500 | 1585 | 1540 | 1765 | 2040 |
L-R | B | mm | 945 | 1075 | 1200 | 1200 | 1320 | |
Height | H | mm | 1900 | 2050 | 2150 | 2480 | 2700 |
ITEM | CODE | UNIT | JH21Z-160 | JH21Z-200 | JH21Z-250 | JH21Z-315 | JH21Z-400 | |
Nominal Capacity | Pe | KN | 1600 | 2000 | 2500 | 3150 | 4000 | |
Tonnage points | mm | 4 | 4 | 4 | 4 | 4 | ||
Slide Stroke Length | S | mm | 80 | 100 | 100 | 100 | 100 | |
Slide Strokes | Fixed | spm | 80 | 65 | 55 | 55 | 55 | |
Variable | spm | 50-95 | 45-80 | 35-65 | 35-65 | 35-65 | ||
Max. Shut Height | H2 | mm | 350 | 380 | 420 | 420 | 450 | |
Shut Height Adjustment | t | mm | 50 | 50 | 50 | 60 | 60 | |
Throat Depth | C1 | mm | 300 | 335 | 360 | 360 | 385 | |
Distance Between Columns | d1 | mm | 696 | 910 | 980 | 980 | 1050 | |
Slide Bottom Size | F-B | b | mm | 580 | 650 | 700 | 700 | 750 |
L-R | a | mm | 700 | 880 | 950 | 950 | 1020 | |
Shank Hole Size | Diameter | d | mm | 70 | 70 | 70 | 70 | 70 |
Depth | I | mm | 100 | 100 | 130 | 130 | 140 | |
Table Size | F-B | D | mm | 580 | 650 | 700 | 700 | 750 |
L-R | C | mm | 1175 | 1390 | 1500 | 1540 | 1700 | |
Thickness | H3 | mm | 135 | 150 | 160 | 160 | 180 | |
Table Hole Diameter | ¢ | mm | 220 | 240 | 240 | 240 | 240 | |
Overall Dimensions | F-B | A | mm | 2305 | 2600 | 2660 | 2720 | 2850 |
L-R | B | mm | 1420 | 1540 | 1640 | 1680 | 1750 | |
Height | H | mm | 2950 | 3450 | 3500 | 3500 | 3780 | |
Motor Power | KW | 15 | 18.5 | 22 | 30 | 37 |
ITEM | CODE | UNIT | JH21Z-25 | JH21Z-45 | JH21Z-60 | JH21Z-80 | JH21Z-125 | |
Nominal Capacity | Pe | KN | 250 | 450 | 600 | 800 | 1250 | |
Tonnage points | mm | 2 | 2.5 | 2.5 | 3.2 | 3.6 | ||
Slide Stroke Length | S | mm | 40 | 50 | 55 | 60 | 70 | |
Slide Strokes | Fixed | spm | 140 | 130 | 120 | 120 | 90 | |
Variable | spm | 95-165 | 85-155 | 80-145 | 80-145 | 60-110 | ||
Max. Shut Height | H2 | mm | 200 | 240 | 260 | 290 | 320 | |
Shut Height Adjustment | t | mm | 30 | 30 | 40 | 40 | 40 | |
Throat Depth | C1 | mm | 135 | 180 | 210 | 240 | 270 | |
Distance Between Columns | d1 | mm | 450 | 515 | 560 | 610 | 670 | |
Slide Bottom Size | F-B | b | mm | 250 | 340 | 480 | 460 | 520 |
L-R | a | mm | 360 | 400 | 400 | 540 | 620 | |
Shank Hole Size | Diameter | d | mm | 50 | 50 | 50 | 50 | 70 |
Depth | I | mm | 50 | 60 | 70 | 70 | 80 | |
Table Size | F-B | D | mm | 250 | 340 | 400 | 460 | 520 |
L-R | C | mm | 720 | 825 | 930 | 950 | 1100 | |
Thickness | H3 | mm | 60 | 80 | 100 | 110 | 125 | |
Table Hole Diameter | ¢ | mm | 150 | 150 | 150 | 180 | 200 | |
Overall Dimensions | F-B | A | mm | 1500 | 1585 | 1540 | 1765 | 2040 |
L-R | B | mm | 945 | 1075 | 1200 | 1200 | 1320 | |
Height | H | mm | 1900 | 2050 | 2150 | 2480 | 2700 |
ITEM | CODE | UNIT | JH21Z-160 | JH21Z-200 | JH21Z-250 | JH21Z-315 | JH21Z-400 | |
Nominal Capacity | Pe | KN | 1600 | 2000 | 2500 | 3150 | 4000 | |
Tonnage points | mm | 4 | 4 | 4 | 4 | 4 | ||
Slide Stroke Length | S | mm | 80 | 100 | 100 | 100 | 100 | |
Slide Strokes | Fixed | spm | 80 | 65 | 55 | 55 | 55 | |
Variable | spm | 50-95 | 45-80 | 35-65 | 35-65 | 35-65 | ||
Max. Shut Height | H2 | mm | 350 | 380 | 420 | 420 | 450 | |
Shut Height Adjustment | t | mm | 50 | 50 | 50 | 60 | 60 | |
Throat Depth | C1 | mm | 300 | 335 | 360 | 360 | 385 | |
Distance Between Columns | d1 | mm | 696 | 910 | 980 | 980 | 1050 | |
Slide Bottom Size | F-B | b | mm | 580 | 650 | 700 | 700 | 750 |
L-R | a | mm | 700 | 880 | 950 | 950 | 1020 | |
Shank Hole Size | Diameter | d | mm | 70 | 70 | 70 | 70 | 70 |
Depth | I | mm | 100 | 100 | 130 | 130 | 140 | |
Table Size | F-B | D | mm | 580 | 650 | 700 | 700 | 750 |
L-R | C | mm | 1175 | 1390 | 1500 | 1540 | 1700 | |
Thickness | H3 | mm | 135 | 150 | 160 | 160 | 180 | |
Table Hole Diameter | ¢ | mm | 220 | 240 | 240 | 240 | 240 | |
Overall Dimensions | F-B | A | mm | 2305 | 2600 | 2660 | 2720 | 2850 |
L-R | B | mm | 1420 | 1540 | 1640 | 1680 | 1750 | |
Height | H | mm | 2950 | 3450 | 3500 | 3500 | 3780 | |
Motor Power | KW | 15 | 18.5 | 22 | 30 | 37 |